Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door trim panel

Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to the window, and take off the plastic covering the opening lever. Unscrew the screws in the handle and the remaining screws on the door panel, then detach the retaining clips. Pull the panel off with your hands and disconnect it from the door (unplug the wiring harness and the opening cable). Install the new door panel on your Peugeot 206.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) Before you start, open the door of your Peugeot 206. Begin by prising off and removing the internal handle trim. Next, unscrew and remove all the scr…
Peugeot 206 (1998-2012 / MK 1) Replacing the door panel on a Peugeot 206? Here’s how to remove the panel from the vehicle. Use a screwdriver to remove the screws located in the han…
Peugeot 206 (1998-2012 / MK 1) Before you begin, open the front door of your Peugeot 206. Start by uncliping and removing the internal cover located near the rearview mirror, then …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos