Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Door Panel on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door trim panel

Replacing the door panel on a Peugeot 206? Here’s how to remove the panel from the vehicle. Use a screwdriver to remove the screws located in the handle on the door panel, and unscrew the screws around the perimeter of the door panel. Detach the cover at the corner of the door panel with your hands, then use a plastic lever to unclip the clips on the panel. Pull the panel away with your hands and lever it off the door. Fit the new panel onto the door, reconnect the electrical connectors, and attach all components necessary for operation. Test the correct assembly of the plastics.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
How to Remove the Door Panel of a Peugeot 206
How to Remove the Door Panel of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you start, open the door of your Peugeot 206. Begin by prising off and removing the internal handle trim. Next, unscrew and remove all the scr…
Removing Front Door Panel on Peugeot 206
Removing Front Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the door panel if it is not repairable on a Peugeot 206. Remove the driver's left panel. Take off the frame of the door opening lever and det…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos