Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the brake light switch in the Peugeot 407?

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Checks and maintenance

In this tutorial, you will see how to replace the brake light switch in the Peugeot 407, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself on the passenger side and go underneath the dashboard. Next, locate the switch on the brake pedal, turn it slightly counterclockwise, and separate it from the support. Now, disconnect the power connector, connect it to the replacement, and install it by simply following the reverse procedure.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 407 (2004-2012 / MK 1) To replace the brake pedal switch, remove the cover panel located just above the pedals and below the steering column. This will allow access to the …
Peugeot 407 (2004-2012 / MK 1) The fuses of the Peugeot 407 are contained within two fuse boxes installed in the vehicle: the first is located in the lower part of the dashboard to…
Peugeot 407 (2004-2012 / MK 1) In this video we can see how to replace the third brake light on a Peugeot 407: from the inside of the rear tailgate, we remove the plate that is loc…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos