Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling and Cleaning the Particulate Filter on the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Diesel particulate filter

Here are the instructions for dismantling the particulate filter on the Peugeot 308. First, open the bonnet of your car and start unscrewing the fixing screws of the manifold connected to the turbo; then disconnect the electrical connector located underneath, as shown in the video. At this point, lift the vehicle and disconnect the exhaust manifold from the catalytic converter by unscrewing the bolt of the metal clamp. Remove and clean or, if necessary, replace the particulate filter, following the video tutorial to the end!

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Diesel Particulate Filter from the Peugeot 308CC?
How to Remove the Diesel Particulate Filter from the Peugeot 308CC?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the diesel particulate filter from the Peugeot 308CC, you need to completely dismantle the catalytic converter located before the exhaust t…
Replacing the Cabin Pollen Filter on a Peugeot 308
Replacing the Cabin Pollen Filter on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How to replace the cabin pollen filter on a Peugeot 308? In this video, see how to carry out the removal. Use pliers to remove the rivets securing th…
Adding AdBlue to a Peugeot 308 1.6 HDi
Adding AdBlue to a Peugeot 308 1.6 HDi
Peugeot 308 (2007-2014 / T7, MK 1) In today's tutorial video, you will see how to add AdBlue to the diesel particulate filter, which helps to reduce exhaust gas emissions, on a Peugeot…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos