Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adding AdBlue to a Peugeot 308 1.6 HDi

Model: Peugeot 308 T7, MK 1 - Years 2007-2014

In today's tutorial video, you will see how to add AdBlue to the diesel particulate filter, which helps to reduce exhaust gas emissions, on a Peugeot 308 1.6 HDi, following these main instructions. First, lift the vehicle and remove the lower cover located under the DPF by unscrewing the bolts; then, disconnect the AdBlue tank pipe and insert the new fluid, as shown in the video. Once you have poured in the entire bottle, reconnect the pipe and replace the protective cover, tightening all the bolts.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the AdBlue Fluid on a Peugeot 308
How to Top Up the AdBlue Fluid on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you can start, open the boot lid of your Peugeot 308. First, unclip and remove the lower boot floor. Then, unscrew the AdBlue refill cap. Once…
How to clean the AdBlue injectors on a Peugeot 308 1.6 HDI
How to clean the AdBlue injectors on a Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) In this video, learn how to clean the AdBlue injectors on a Peugeot 308 1.6 HDI: by removing them, you will see they are heavily caked with the addit…
How to Reset the AdBlue Warning Light on the Peugeot 308?
How to Reset the AdBlue Warning Light on the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) If the AdBlue warning light appears on the dashboard of the Peugeot 308, it means that the level of additive liquid inside the appropriate tank is in…

    Frequently Asked Questions

    • 308 2013-2021 - Where is the air conditioning fuse located in a Peugeot 308? Read answer
    • 308 2013-2021 - Where is the urea tank located on Peugeot 308? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos