Do it yourself
| ||||
|
Peugeot 308 - Video tutorial
Model: Peugeot 308
MK 2, T9
- Years 2013-2021 Before we can start, we will have to open the tailgate of the rear trunk of our Peugeot 308. Let's start then by going to disengage and remove the lower floor of the trunk. After that, we will have to go and unscrew the filler cap of the AdBlue liquid. Once this is done, we will have to insert a funnel inside the filling hole of the AdBlue liquid. At this point, we can top up the AdBlue liquid inside the relative tank. When we have completed this step, we will be able to remove the funnel, and we will have correctly completed the AdBlue refilling on our Peugeot 308.
Posted on 14 March 2024 by ScegliAuto
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |