Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: AdBlue warning light

This guide explains how to reset the AdBlue warning light on the Peugeot 308, as well as the 3008. Before resetting, ensure that the AdBlue fluid is topped up. Then, get inside the vehicle and connect your diagnostic tool, performing a system check and navigating to the AdBlue section. Next, reset the warning light to clear it from the instrument cluster; this will allow the AdBlue level to restore, enabling its normal function.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Warning Light on the Peugeot 308
How to Reset the AdBlue Warning Light on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) This guide provides the main instructions to reset the AdBlue warning light on the Peugeot 308. Before resetting the light, ensure you have topped up…
How to Reset the AdBlue Light on a Peugeot 308?
How to Reset the AdBlue Light on a Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) When the AdBlue light illuminates on the Peugeot 308 display, it means that the level of additive liquid in the designated tank is insufficient. To r…
How to Top Up the AdBlue Fluid on a Peugeot 308
How to Top Up the AdBlue Fluid on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you can start, open the boot lid of your Peugeot 308. First, unclip and remove the lower boot floor. Then, unscrew the AdBlue refill cap. Once…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - Where do you refill the AdBlue on the Peugeot 308? Read answer
    • 308 2007-2014 - Where is the AdBlue fuse on a Peugeot 308? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos