Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to reset the Peugeot 308 AdBlue warning light

Peugeot 308 - Video tutorial

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Checks and maintenance
Operation: How to reset the Peugeot 308 AdBlue warning light

In this guide, let's see the main instructions that will allow us to reset the AdBlue warning light on the Peugeot 308. Before resetting the warning light, it is necessary to have topped up with the new AdBlue liquid (in the use and maintenance booklet à the quantity of AdBlue to top up at the time of the warning is indicated); then we get on board the car and connect our diagnostic software, following the procedure indicated to reset the topping up warning. Finally, turn off the ignition and start the engine, completing the reset operation!


Posted on 23 December 2022 by ScegliAuto

    Frequently Asked Questions

    • 308 2021-2027 - What are the main problems of the Peugeot 308 1.6 HDi with 110 horsepower? Read Answer
    • 308 2007-2014 - Where is the AdBlue tank located in the Peugeot 308? Read Answer
    • 308 2013-2021 - What problems have been found with the 1.5 hdi 130 hp engine? Read Answer
    • 308 2013-2021 - What does the AdBlue warning light on the Peugeot 308 require? Read Answer
    • 308 2013-2021 - How to reset the AdBlue warning light on a Peugeot 308? Read Answer
    • 308 2013-2021 - What does the warning light with an exclamation mark inside a triangle indicate in the Peugeot 308? Read Answer
    • 308 2007-2014 - What is the problem with the touchscreen display of the Peugeot 308? Read Answer
    • 308 2013-2021 - What is the cause of the problem with the tire pressure sensor on the 308? Read Answer
    • 308 2013-2021 - Where do you refill the AdBlue on the Peugeot 308? Read Answer
    • 308 2021-2027 - How do you set the time on a Peugeot 308? Read Answer
    • 308 2013-2021 - What to do if the engine of the Peugeot 308 is turning but not starting? Read Answer
    • 308 2013-2021 - Why is the Peugeot 308 not connecting to Bluetooth? Read Answer
    • 308 2021-2027 - What could cause injection problems with the AdBlue of the Peugeot 308? Read Answer
    • 308 2013-2021 - What problems does the Peugeot 308 have? Read Answer
    • 308 2021-2027 - How to solve the AdBlue problem on Peugeot 308? Read Answer
    • 308 2013-2021 - Where can I find the radio code for the Peugeot 308? Read Answer
    • 308 2021-2027 - What is meant by emission system error, regarding the Peugeot 308? Read Answer
    • 308 2013-2021 - What does the STOP warning light on the Peugeot 308 indicate? Read Answer
    • 308 2013-2021 - What problems does the Peugeot 308 AdBlue light cause? Read Answer
    • 308 2013-2021 - How much AdBlue do you want in a Peugeot 308? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos