Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the AdBlue injectors on a Peugeot 308 1.6 HDI

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: AdBlue warning light

In this video, learn how to clean the AdBlue injectors on a Peugeot 308 1.6 HDI: by removing them, you will see they are heavily caked with the additive. First, clean them with a wire brush, then with a small screwdriver, and finally spray inside the nozzle and pipe with WD-40. This is certainly a valid solution, as our YouTuber has recommended it. We also suggest simply washing them with hot water. AdBlue is water-soluble, and hot water yields miraculous results, effortlessly and without the risk of damage. Both methods are valid.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to clean or replace the AdBlue injector on the Peugeot 308 1.6 HDi
How to clean or replace the AdBlue injector on the Peugeot 308 1.6 HDi
Peugeot 308 (2013-2021 / T9, MK 2) In this video, we see where the AdBlue injector of the Peugeot 308 is located, so that we can replace or clean it, if necessary. We need to lift the …
Replacing Temperature Sensor on Peugeot 308 HDI
Replacing Temperature Sensor on Peugeot 308 HDI
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to remove the temperature sensor from a Peugeot 308 HDI. The temperature sensor is a crucial component tha…
How to Top Up the AdBlue Fluid on a Peugeot 308
How to Top Up the AdBlue Fluid on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you can start, open the boot lid of your Peugeot 308. First, unclip and remove the lower boot floor. Then, unscrew the AdBlue refill cap. Once…

    Frequently Asked Questions

    • 308 2013-2021 - Where do you refill the AdBlue on the Peugeot 308? Read answer
    • 308 2007-2014 - Where is the AdBlue fuse on a Peugeot 308? Read answer

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos