Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Car Shock Absorbers

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Shocks

See other generations:
Video tutorial

If your car has covered more than approximately 62,000 miles, you should consider replacing the shock absorbers. Shock absorbers serve to cushion the vehicle's bumps and enhance safety while cornering.

This guide shows how to replace them without visiting your trusted mechanic. Once you have purchased the new shock absorbers, obtain a compressor with a pneumatic gun, a jack, and a spring compressor tool.

Lift the left side of the car with the jack and then remove the wheel, ensuring you take off all four bolts holding it in place. At this point, open the bonnet by operating the appropriate lever and remove all four screws located above the shock absorber, which will then come off almost by itself.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Peugeot 5008 (2009-2016 / MK 1) Learn how to replace the front brake pads on a Peugeot 5008. Lift the vehicle on a column jack (or trolley jack) to the desired height, then remove t…
Peugeot 5008 (2009-2016 / MK 1) To replace the front brake pads on a Peugeot 5008, lift the vehicle to the desired height, then remove the wheel (using a telescopic key or air drill…
Peugeot 5008 (2009-2016 / MK 1) Want to replace the air filter in your car? Here’s how to remove the air filter from a Peugeot 5008. Lift the front bonnet, and undo the securing scr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos