Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads on a Peugeot 5008

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Brake pads

To replace the front brake pads on a Peugeot 5008, lift the vehicle to the desired height, then remove the wheel (using a telescopic key or air drill) along with the respective pins. Unscrew the locking pin of the brake caliper and remove it from the wheel support. Detach the pads from the brake caliper. Install the new pads in the brake caliper; then, mount the caliper over the brake disc. Bleed the brake caliper and apply pressure. Refit the wheel and all components.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on Peugeot 5008
How to Replace the Rear Brake Pads on Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) This guide provides instructions on how to replace the rear brake pads on a Peugeot 5008. First, lift the vehicle and start by removing the rear whee…
Replacing Brake Pads on Peugeot 5008
Replacing Brake Pads on Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Learn how to replace the front brake pads on a Peugeot 5008. Lift the vehicle on a column jack (or trolley jack) to the desired height, then remove t…
Replacement of the rear brake pads of the Peugeot 5008.
Replacement of the rear brake pads of the Peugeot 5008.
Peugeot 5008 (2017-2024 / MK 2) Today we will see the instructions that will allow us to disassemble and replace the rear brake pads (also valid for the front ones) of the Peugeot 5…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos