Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear brake pads of the Peugeot 5008.

Model: Peugeot 5008 MK 2 - Years 2017-2024
Part: Brake pads

Today we will see the instructions that will allow us to disassemble and replace the rear brake pads (also valid for the front ones) of the Peugeot 5008. First of all, we raise the vehicle and start by removing the rear wheel; then we unscrew the screws of the rear brake caliper to remove it from the disc, applying pressure on the caliper piston to retract it, as shown in the video. At this point, we remove and replace the brake pads, installing the original ones; we clean the caliper from the remaining dirt and reassemble the brake caliper on the disc!

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads on a Peugeot 5008
Replacing Front Brake Pads on a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) To replace the front brake pads on a Peugeot 5008, lift the vehicle to the desired height, then remove the wheel (using a telescopic key or air drill…
How to deactivate the electronic handbrake on the Peugeot 5008 II
How to deactivate the electronic handbrake on the Peugeot 5008 II
Peugeot 5008 (2017-2024 / MK 2) Let's see how to deactivate the electronic handbrake in order to make the necessary repairs on the rear brakes of the Peugeot 5008 version II: this o…
How do you reset the AdBlue light on the Peugeot 5008?
How do you reset the AdBlue light on the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) In order to reset the AdBlue warning light of the Peugeot 5008, you need to go and add the necessary amount of additional fluid into the correspondin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos