|
Do it yourself
| |||
| ||||
How to Replace Front Brake Pads and Discs on a Peugeot 5008
Model: Peugeot 5008
MK 2
- Years 2017-2024
In this video, you can see how to replace the brake pads and discs on a Peugeot 5008: after removing the front wheels and opening the brake fluid cap, remove the retaining clip from the brake caliper; also remove the rubber caps at the back of the caliper, where you will find Allen screws. Unscrewing these components will release the entire caliper containing the pads, but first, you need to remove the tensioned hook. Remove the pistons from the caliper and take off the caliper, being careful with the brake hose. Remove the pads and also the fixed part of the brake caliper, as you need to change the discs as well. Clean the hub and then spread anti-friction paste before inserting the new disc. Then, reassemble the fixed part of the caliper, again using grease, but be careful not to leave any grease on the disc. Refit the caliper, lubricating the moving points, with the new pads, and the job is complete.
Updated on 4 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 5008
(2009-2016 /
MK 1)
Learn how to replace the front brake pads on a Peugeot 5008. Lift the vehicle on a column jack (or trolley jack) to the desired height, then remove t…
Peugeot 5008
(2017-2024 /
MK 2)
This guide provides instructions on how to replace the rear brake pads on a Peugeot 5008. First, lift the vehicle and start by removing the rear whee…
Peugeot 5008
(2017-2024 /
MK 2)
Today we will see the instructions that will allow us to disassemble and replace the rear brake pads (also valid for the front ones) of the Peugeot 5…
Other guides you may be interested in
|
How to Replace the Cabin Filter on the Opel Grandland X
If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.078
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |