Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the Peugeot 408?

Model: Peugeot 408 T7 - Years 2010-2014
Part: Fuse box

In this video, you will see where the fuse boxes are located on the Peugeot 408 and their respective diagrams, useful in case you need to check the fuses of a malfunctioning device. The first box is located inside the cabin, behind the small glove compartment in the lower area of the dashboard on the driver's side. The second box is positioned in the engine compartment, protected by the black plastic cover located behind the left headlamp. If a fuse is blown, ensure you use a replacement with equivalent specifications.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Peugeot 408?
Where are the fuses located in the Peugeot 408?
Peugeot 408 (2010-2014 / T7) The fuses of the Peugeot 408 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of car it will be possible…
Where is and how to reach the fuse box of a Peugeot 408?
Where is and how to reach the fuse box of a Peugeot 408?
Peugeot 408 (2010-2014 / T7) The fuse box of a Peugeot 408 is located in the engine compartment. To reach it, start by opening the vehicle's hood by pulling the hood release leve…
How do you replace the gear knob of the Peugeot 408?
How do you replace the gear knob of the Peugeot 408?
Peugeot 408 (2010-2014 / T7) In order to replace the gear knob of the Peugeot 408, you will need to grab the old knob and rotate it counterclockwise so that it can be released fr…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos