Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to reset the tire pressure warning light in the Peugeot 308?

Peugeot 308 - Video tutorial

Model: Peugeot 308 P5, MK 3 - Years 2021-2024
Part: Tires
Operation: How to reset the tire pressure warning light in the Peugeot 308?

Resetting the tire pressure sensor in the Peugeot 308, as we can see in this tutorial, is an extremely simple and quick operation. Before doing this, we must have restored the correct tire pressure following the instructions in the manual. We start by going inside the car, then we turn on the instrument panel and access the general menu on the touchscreen display. We then enter "Settings", "Vehicle", "Safety", "Tyre Pressure Setup", and reset by selecting the appropriate option. To complete the procedure, simply restart the instrument panel.


Posted on 10 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 308 2007-2014 - How do you reset the tire pressure warning light on a 2009 Peugeot 308? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos