Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Shell of the External Rear-View Mirror on the Peugeot Boxer 2

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Side mirror

If the outer cover of the external rear-view mirror on the Peugeot Boxer is broken due to an impact, you need to replace it. First, gently detach the two sections of the mirror, then unscrew the two screws holding the indicator light. From the inside, unscrew the four screws that hold the mirror shell, remove the sensor located at the bottom, and take it out. Take the new shell, insert the sensor, pass the indicator light through its housing, attach the shell to the mirror structure, screw in the four screws that secure it, position the indicator light, and fix it with its screws. Finally, reattach the two sections of the mirror.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the Cover of the External Wing Mirror of the Peugeot Boxer
Dismantling the Cover of the External Wing Mirror of the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Today's guide will show you the main steps to dismantle and replace the plastic cover of the external wing mirror of the Peugeot Boxer, as well as th…
How to Replace the External Wing Mirror on a Peugeot Boxer
How to Replace the External Wing Mirror on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) To replace the external wing mirror on a Peugeot Boxer, use a tool to pry off the inner door trim corresponding to the mirror: once removed, you will…
How do you replace the external rearview mirror of the Peugeot Boxer?
How do you replace the external rearview mirror of the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) The procedure for replacing the external rearview mirror on the Peugeot Boxer is done by levering with an object, so that the internal door panel can…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos