Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Rear-View Mirror on a Peugeot Boxer - Fiat Ducato

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Side mirror

See other generations:
Video tutorial

Today's instructions will show you how to remove and replace the external rear-view mirror on a Peugeot Boxer, as well as on the Citroen Relay and Fiat Ducato. First, open the front door and start by removing the window switch panel; then disconnect the electrical connector and unscrew the fixing screws of the external rear-view mirror, disconnecting the indicator bulb connector to pull it out from the outside, as shown in the video.

At this point, install the new rear-view mirror, finally adjusting the glass!


Updated on 9 October 2026 by ScegliAuto


Related tutorials

Dismantling the Cover of the External Wing Mirror of the Peugeot Boxer
Dismantling the Cover of the External Wing Mirror of the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) .. wing mirror of the Peugeot Boxer, as well as the Fiat Ducato. First, move to the outside of the vehicle and start by removing the glass of the external.. …
Replacing the Shell of the External Rear-View Mirror on the Peugeot Boxer 2
Replacing the Shell of the External Rear-View Mirror on the Peugeot Boxer 2
Peugeot Boxer (2006-2024 / MK 2) If the outer cover of the external rear-view mirror on the Peugeot Boxer is broken due to an impact, you need to replace it. First, gently detach the…
How to Change the Indicator Bulb on the Peugeot Boxer - Fiat Ducato
Peugeot Boxer (2006-2024 / MK 2) .. external wing mirror on the Peugeot Boxer and the Fiat Ducato. First, unscrew the fixing screws located on the side of the mirror glass; once removed,.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos