Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How to replace the front fender of the Peugeot 508

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Operation: How to replace the front fender of the Peugeot 508

Briefly, we will see the instructions that will allow us to disassemble and replace the front fender of the Peugeot 508. First, let's move to the side and start disassembling and removing the front wheel arch, unscrewing the fixing screws; then we open the engine hood and unscrew the additional screws of the front fender, which we find on the top, in order to release it and remove it, as shown in the video. At this point, we install the new front fender, after painting it; we fix it correctly and reinstall the wheel arch!


Posted on 29 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 508 2018-2026 - What is the problem with the Adblue system on the Peugeot 508? Read Answer
    • 508 2018-2026 - What is the price of the Peugeot 508 AdBlue tank? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos