Do it yourself
| ||||
|
Peugeot 308 - Video tutorial
Model: Peugeot 308
MK 1, T7
- Years 2007-2014 In this video we can see how to reset the service light of the Peugeot 308 T7 version, produced between 2007 and 2014. It is a very simple procedure; we get into the car and make sure all the doors are closed, then with the car off, we press and hold the button of the partial odometer. At this point we turn on the ignition, turning on only the instrument panel: a countdown of ten will start on the display. When "0" appears on the display, we can release the button of the partial odometer, the service will then be reset. We can turn off the ignition.
Posted on 24 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |