Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to reset the Peugeot 308 service

Peugeot 308 - Video tutorial

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: -board computer
Operation: How to reset the Peugeot 308 service

In this video we see how to reset the Peugeot 308 MK2 HDI service. This is an operation that is necessary following a service carried out by oneself or in a generic workshop; if performed in the parent company, as a rule, they will reset the car service warning light. To perform the operation we need to locate the key with the three zeros and hold it down; without releasing the button we start the panel (by turning the key to position 1 or if keyless by pressing the start & stop button once). In the on-board computer we will see a countdown and once this is finished the service will be reset.


Posted on 17 June 2022 by ScegliAuto

    Frequently Asked Questions

    • 308 2013-2021 - How to deactivate the START&STOP feature of Peugeot 308? Read Answer
    • 308 2021-2027 - Why is the infotainment system display of the Peugeot 308 2022 not working? Read Answer
    • 308 2007-2014 - How to solve the problem of the AdBlue error signal on Peugeot 308? Read Answer
    • 308 2013-2021 - What does the engine light on a Peugeot 308 mean? Read Answer
    • 308 2013-2021 - What does the AdBlue anomaly message on Peugeot 308 mean? Read Answer
    • 308 2013-2021 - How to solve the anti-pollution problem on Peugeot 308? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos