Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 3008
  6. : How to replace the headlight bulb on Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Headlight bulb
Operation: How to replace the headlight bulb on Peugeot 3008

To carry out this simple replacement, unhook the hood from the special lever and then lift it and fix it with the special rod, now you will have to go and locate the rear part of the headlight, in fact it will be protected externally by a soft plastic cap, you just need to pull it to be able to remove it and have direct access to the bulb pins. Then disconnect it and rotate the bulb by grabbing it by the rear clamps, in this way you can extract it and install the new bulb being careful not to touch the glass part with your fingers, and that's it!


Posted on 26 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos