Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the engine oil on a Peugeot 4008

Model: Peugeot 4008 MK 1 - Years 2012-2017
Part: Warning light – error code

Through this very short video tutorial today, you will be able to see the entire procedure in a few simple steps to reset the maintenance light of the engine oil on a Peugeot 4008. Let's start the procedure immediately with the ignition key inserted but the engine off, then press the "INFO" button, located on the left of the speedometer, until the maintenance interval message of the vehicle is displayed on the information display, then press and hold the same button until the message flashes. After doing this, release the button and press it again to reset it, the appearance of the "CLEAR" message will confirm the successful completion of the operation.

Posted on 31 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Peugeot 4008 with DiagBox?
How do you reset the Service light of the Peugeot 4008 with DiagBox?
Peugeot 4008 (2012-2017 / MK 1) To reset the Service light of the Peugeot 4008 using DiagBox, you will need to connect this diagnostic tool to the corresponding OBD port of the vehi…
What is the fuse diagram for the Peugeot 4008?
What is the fuse diagram for the Peugeot 4008?
Peugeot 4008 (2012-2017 / MK 1) In this video, you can see where the fuse boxes are located in the Peugeot 4008 and their respective diagrams, useful in case you need to check the f…
What is the fuse layout of the Peugeot 4008?
What is the fuse layout of the Peugeot 4008?
Peugeot 4008 (2012-2017 / MK 1) In this video we can see where the fuse boxes of the Peugeot 4008 are located and what are the respective diagrams, useful in case we need to check t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos