Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to remove the rear view mirror of a Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Outside rearview mirror
Operation: How to remove the rear view mirror of a Peugeot 3008

Let's see in this video how to remove a rear view mirror of a Peugeot 3008. In order to be able to remove the mirror, the door panel of the door must be removed. Let's start by disassembling the handle on the panel with a screwdriver, then, let's remove it and disconnect the clamps. We unscrew the screws of the perimeter of the door and detach it with our hands. We disassemble the mirror bolts, inserting a socket wrench with insert in the holes in the sheet as in the video. During disassembly, we hold the mirror with the other hand to keep it from falling to the ground. We remove the mirror and replace it with a new one, then we reassemble everything by proceeding backwards.


Posted on 28 September 2023 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - What to do when the Peugeot 3008 mirror does not work? Read Answer
    • 3008 2016-2023 - What to do if the mirror of the Peugeot 3008 does not close? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos