Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the rearview mirror of the Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

In this video, we see how to dismantle the rearview mirror of a Peugeot 3008: first, we need to remove the speaker located in the front triangle of the door, held in place only by clips: remove the electrical connector of the tweeter. Below, we find a torx screw, which we remove.

Now we also need to remove the door panel, starting with the screws under the handle. We will find another screw under the inner handle, and one under the lower part of the plastic panel.

Now, lever inside the panel and remove it, being careful: in the middle there are two metal clips that we need to remove to take out the panel, which we simply push upwards after disconnecting the electrical connectors, allowing us to also remove the mirror.

The new one usually has a paintable cover, so if the old one is in good condition, it is convenient to replace it to avoid the cost of painting.

Now, put the mirror back in place by reconnecting the electrical connectors and then putting back the door panel in the reverse order. Finally, put the tweeter back in the corner of the window.


Posted on 22 February 2025 by ScegliAuto


Related tutorials

Peugeot 3008 (2009-2016 / MK 1, T84) To replace the interior rear-view mirror on a Peugeot 3008, use a tool to pry off the plastic cover on the back of the mirror support. Once the cover…
Peugeot 3008 (2009-2016 / MK 1, T84) In this video, we will see how to remove a wing mirror from a Peugeot 3008. To remove the mirror, you need to take off the door panel. Start by unscr…
Peugeot 3008 (2016-2023 / P84, MK 2) This is a simple and quick DIY task. If the external wing mirror on your Peugeot 3008 breaks, likely due to an impact, do the following: Insert two f…

Other guides you may be interested in

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos