Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program a new remote control in the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Key

In this tutorial we can see how to program a new remote control in the Peugeot 206, a very simple and fast operation. To do this, we will obviously need a working key. First of all, let's go inside the car, then insert the new remote control, turn on the instrument panel and hold down the door lock button for three seconds. Then remove the key, hold down the unlock button for another three seconds and open the driver's door and then close it. At this point, the remote control will be correctly configured.

Posted on 20 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Program the Remote for the Peugeot 206
How to Program the Remote for the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Here are the main instructions for programming the key remote of the Peugeot 206. First, get in the vehicle and press and hold the clutch pedal; then…
How to program the remote control and key of the Peugeot 206.
How to program the remote control and key of the Peugeot 206.
Peugeot 206 (1998-2012 / MK 1) Today we will look at the instructions that will allow us to program the remote control and the key for the Peugeot 206. First, let's get inside the …
How do you program the key of the Peugeot 206?
How do you program the key of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To program the key of the Peugeot 206, you need to connect a diagnostic tool to the OBD port of the vehicle, after inserting the blank key into the k…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos