Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the remote control and key of the Peugeot 206.

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Key

Today we will look at the instructions that will allow us to program the remote control and the key for the Peugeot 206. First, let's get inside the vehicle and start by inserting the key into the ignition cylinder, then holding down the button until the small light on the remote control turns on, as shown in the video. At this point, press the button two more times while still near the vehicle, and then turn on the ignition for at least three seconds, removing the key afterward and holding down the button again. Next, we will program the key using the appropriate tool.

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to program a new remote control in the Peugeot 206?
How to program a new remote control in the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this tutorial we can see how to program a new remote control in the Peugeot 206, a very simple and fast operation. To do this, we will obviously n…
How to replace the battery of the Peugeot 206 remote control
Peugeot 206 (1998-2012 / MK 1) In the following guide you will find the description of all the steps you need to apply if you want to replace the battery inside the remote control …
Programming Remote Key for Peugeot and Citroën
Programming Remote Key for Peugeot and Citroën
Peugeot 206 (1998-2012 / MK 1) On many Peugeot and Citroën models, it is necessary to reprogram the key after replacing the battery of the central locking remote. In this specific …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos