Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the diesel filter on the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Diesel fuel filter

Video tutorial

To replace the diesel filter on the Peugeot 207, open the front bonnet; the filter is located to the left of the air filter. Start by removing the three pipes with a small screwdriver, then disconnect the electrical connector.

Using an 8mm socket, unscrew the two bolts securing the filter. Take it to a work surface and place it in a container to collect the diesel inside.

Using a Torx 15, unscrew the three screws on the cover, turn the central lever to separate the cover, which will cause diesel to spill out. Install the new filter onto the cover after removing the service caps, screw the three screws back in, and turn the lever.

Refit the filter in its place, reversing the previous operations, and use the pump on the side to fill the filter.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on a Peugeot 207
Replacing the Diesel Filter on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Change the fuel filter as stated in the manual every certain number of miles. Replacing the diesel filter on a Peugeot 207. Lift the front bonnet and…
Replacing Diesel Filter on Peugeot 207
Replacing Diesel Filter on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this tutorial video, you will learn how to remove and replace the diesel filter on a Peugeot 207. First, open the bonnet and locate the diesel fil…
Replacing the Diesel Filter on the Peugeot 207 - 208 1.4 - 1.6 HDI
Replacing the Diesel Filter on the Peugeot 207 - 208 1.4 - 1.6 HDI
Peugeot 207 (2006-2015 / MK 1) Discover in this video how to remove and replace the diesel filter on the Peugeot 207 1.6 HDI, as well as on the 1.4 HDI and all other models from th…

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos