Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video we see how the ignition of the wrench-shaped light on the instrument panel of the Piaggio Vespa Gts 125 reminds us that we are approaching the mileage specified in the maintenance schedule: this for the replacement of the engine oil and its filter. After performing this important maintenance operation, we reset the control system that handles the notification. We turn the ignition switch to "on" and simultaneously press the "mode" button on the left handlebar, we will see the light start flashing and then turn off, release the button and turn off the dashboard to complete the procedure.

Posted on 14 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Piaggio Vespa GTS 125?
How do you reset the Service light on the Piaggio Vespa GTS 125?
Vespa Gts 125 The Service light that is shown on the instrument panel of the Piaggio Vespa GTS 125 can be completely deleted by turning on the instrument panel, tu…
How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
Vespa Gts 125 Below we will see the instructions that will allow us to adjust the stiffness of the rear suspension of the Piaggio Vespa GTS 125 scooter, but also o…
How to Change the Engine Oil and Oil Filter on the Piaggio Vespa GTS 125
How to Change the Engine Oil and Oil Filter on the Piaggio Vespa GTS 125
Vespa Gts 125 In this brief and simple guide, we will go through the steps to perform routine maintenance by changing the engine oil and oil filter on the Piaggio …

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos