Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The Service light that is shown on the instrument panel of the Piaggio Vespa GTS 125 can be completely deleted by turning on the instrument panel, turning the ignition key inside the corresponding block; at this point, you will need to hold down the lever to access the menu that will be on the left side of the handlebar. You will need to keep this lever pressed for about ten seconds, until the Service light starts flashing until it goes out completely; once the reset of the light has occurred, you can release the button and turn off the instrument panel completely.

Posted on 22 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
Vespa Gts 125 Below we will see the instructions that will allow us to adjust the stiffness of the rear suspension of the Piaggio Vespa GTS 125 scooter, but also o…
How to Replace the Front Indicator Bulb on the Piaggio Vespa GTS 125
How to Replace the Front Indicator Bulb on the Piaggio Vespa GTS 125
Vespa Gts 125 To replace the front indicator bulb on the Piaggio Vespa GTS 125, loosen the screw located at the bottom of the headlamp assembly. Once this screw is…
How do you replace the piston of the Piaggio Vespa GTS 125?
How do you replace the piston of the Piaggio Vespa GTS 125?
Vespa Gts 125 To replace the piston of the Piaggio Vespa GTS 125, you need to loosen the screws that secure the valve cover to the engine block, after removing all…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos