Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front mask of a Vespa LX 125?

Model: Piaggio Vespa 125 Lx
Part: Checks and maintenance

Video tutorial

To dismantle the front mask of a Vespa LX 125, start by placing the scooter on the center stand. Then, remove the front panel covering the headlight by taking out the screws or clips.

Check the bottom part of the mask for screws or clips and remove them. Check the fastening devices on the sides and carefully dismantle them.

Gently pull outwards to unhook the mask. Pay attention to the cables and connectors, such as those for the lights.

For reassembly, reconnect the cables and clips in reverse order. Always be careful to avoid damage and use the appropriate tools.


Posted on 8 January 2025 by ScegliAuto


Related tutorials

How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
Vespa 125 Lx In this tutorial, you will see how to replace the headlight bulb on a Piaggio Vespa 125 LX scooter, a very simple and quick operation. First, ensure …
How to Remove the Front Wheel of a Vespa LX 125
How to Remove the Front Wheel of a Vespa LX 125
Vespa 125 Lx To correctly remove the front wheel of your Vespa LX 125, follow these few simple steps outlined in this guide. Before starting, ensure you have a ba…
Replacing the Battery on a Piaggio Vespa LX 125
Replacing the Battery on a Piaggio Vespa LX 125
Vespa 125 Lx In this guide, you will learn how to remove and replace the battery of a Piaggio Vespa 125 LX. First, open the seat by turning the key; then remove t…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos