Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Piaggio Beverly?

Model: Piaggio Beverly 300
Part: Battery

Video tutorial

To change the battery of a Piaggio Beverly, first lift the seat of the scooter to access the battery compartment. Once the seat is open, locate the battery, usually located under the seat itself.

Before proceeding, make sure the scooter is turned off and the key switch is in the "off" position. Disconnect the negative (-) connector and then the positive (+) connector of the battery using an appropriate key or screwdriver.

Be careful not to short circuit with metallic tools. Remove the old battery and replace it with a new one of the same type and size.

Make sure to properly position the new battery in the compartment and reconnect the connectors, connecting the positive (+) one first and then the negative (-) one. Verify that the connectors are securely connected and that there are no damaged cables.

Close the seat and turn on the scooter to ensure that the new battery is functioning properly.


Posted on 13 January 2025 by ScegliAuto


Related tutorials

Replacing the Battery of the Piaggio Beverly 300
Replacing the Battery of the Piaggio Beverly 300
Beverly 300 Briefly, we will see the instructions that will allow you to remove and replace the battery of the Piaggio Beverly 300 scooter. First, place the scoo…
How to Change the Gear Oil on the Piaggio Beverly 300?
How to Change the Gear Oil on the Piaggio Beverly 300?
Beverly 300 You can change the gear oil on the Piaggio Beverly 300 by unscrewing the plug located at the central lower part of the transmission casing: at this p…
How to replace the battery of the Piaggio Beverly 300
How to replace the battery of the Piaggio Beverly 300
Beverly 300 Today, in this guide, we will see the instructions that will allow us to disassemble and replace the battery of the Piaggio Beverly 300 scooter. Firs…

How to Replace the Handlebars on the Ducati Scrambler

This guide provides instructions on how to remove and replace the handlebars on the Ducati Scrambler motorcycle, following the steps outlined below. First, place the bike on its centre stand and begin removing the grips by unscrewing the screws and taking off the bar ends; then unscrew the handlebar mounting screws to remove the handlebars, as shown in the video. At this point, correctly install the new handlebars to ensure they are centred; then reassemble and secure the grips and side bar ends, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos