Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, in this guide, we will see the instructions that will allow us to disassemble and replace the battery of the Piaggio Beverly 300 scooter. First, let's place the scooter on the center stand and begin by lifting the rider's seat; then we remove the plastic cover located at the bottom to access the battery, disconnecting both terminals (positive and negative) in order to remove it, as shown in the video. At this point, we will install the new battery, of the correct type and with the same amperage; once the electrical connection is made, we will check the engine's ignition!

Posted on 9 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery of the Piaggio Beverly 300
Replacing the Battery of the Piaggio Beverly 300
Beverly 300 Briefly, we will see the instructions that will allow you to remove and replace the battery of the Piaggio Beverly 300 scooter. First, place the scoo…
How to replace the battery in the Piaggio Beverly 300 scooter?
How to replace the battery in the Piaggio Beverly 300 scooter?
Beverly 300 In this tutorial, we will see how to replace the battery in the Piaggio Beverly 300 scooter, a very simple and quick operation. First, ensure that th…
Headlight adjustment on Piaggio Beverly 300
Headlight adjustment on Piaggio Beverly 300
Beverly 300 Through this very useful video tutorial, we can see the entire operation necessary to adjust the headlight on a Piaggio Beverly 300/350. This operati…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos