Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Et4
Part: Seat

In this video, we can see how to open the seat of a Vespa Piaggio - any model - without having the key on hand. Maybe we forgot it inside, and to open it, we will only need a piece of metal wire. We insert it under the seat on one side and near the lock, pulling it out in an arc on the other side. We take the two ends of the metal wire and pull towards us until the wire manages to open the simple lock that closes the seat. This way, we can lift it and retrieve our key that was left inside the storage compartment.


Posted on 6 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plug of the Piaggio Vespa 150 ET4
How to replace the spark plug of the Piaggio Vespa 150 ET4
Vespa Et4 The following steps will show us how to disassemble and replace the spark plug of the Piaggio Vespa 150 ET4 scooter engine. First of all, we put the …
How do you remove the carburetor from the Piaggio Vespa ET4 125?
How do you remove the carburetor from the Piaggio Vespa ET4 125?
Vespa Et4 In order to remove the carburetor of the Piaggio Vespa ET4 125, you need to open the underseat compartment so that you can loosen the screws that sec…
Guide to replacing the starter motor of the Piaggio Vespa ET4 150
Guide to replacing the starter motor of the Piaggio Vespa ET4 150
Vespa Et4 Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the …

How to change the engine oil of a Triumph Bobber?

To replace the engine oil of a Triumph Bobber, start by making sure that the motorcycle is positioned on a stable and flat surface, preferably using a stand to keep it in a vertical position. Before proceeding, start the engine for a few minutes to warm up the oil and make it more fluid. Once the engine is turned off, locate the drain plug under the engine and place a suitable container to collect the used oil. Unscrew the plug with a suitable wrench and let the fluid drain completely. Once the old oil has been drained, clean the threading of the plug carefully and reinstall it, tightening it with the correct torque. Finally, remove the top cap of the oil tank, pour in the specified amount as indicated in the manual, and check the level with the dipstick. Finish by starting the motorcycle for a moment and checking for any leaks.

Watch the video!


by ScegliAuto

More videos