Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 300
Part: Clock

The clock shown on the instrument panel of the Yamaha Xmax 300 can be adjusted by turning on the instrument panel and turning the key inside the ignition switch: once the instrument panel is turned on, you can press and hold the button located on the right side of the handlebars, just below the red button. This will make the clock hours start flashing, and they can be adjusted by pressing the same button repeatedly; after a few seconds, the minutes will also start flashing, and they can be adjusted in the same way.

Posted on 7 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on the Yamaha Xmax 300
How to set the clock on the Yamaha Xmax 300
Xmax 300 Let's see the procedure on how to set the clock on the display of the instrument panel of the Yamaha Xmax 300 scooter. First, put the scooter on the …
How do you set the clock on the Yamaha Xmax 300?
How do you set the clock on the Yamaha Xmax 300?
Xmax 300 On the instrument panel of the Yamaha Xmax 300, the clock adjustment can be done by turning on the instrument panel and rotating the key inside the i…
How to set the clock on the Yamaha Xmax 300
How to set the clock on the Yamaha Xmax 300
Xmax 300 The following steps will allow us to set the clock on the display of the instrument panel of the Yamaha Xmax 300 scooter. First, turn on the instrume…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos