Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the gearbox oil of the Piaggio Vespa 50 Special?

Model: Piaggio Vespa 50 Special
Part: Transmission fluid

Video tutorial

It will be possible to replace the gearbox oil of the Piaggio Vespa 50 Special by loosening the drain plug located in the central lower part of the transmission case: once the plug has been removed, it will be possible to drain all the old oil into a properly positioned container.

By doing so, it will then be possible to close the case and top up from the appropriate vent: the necessary amount of oil can be added using a syringe.

After topping up, it will be necessary to check that everything is functioning properly.


Posted on 29 April 2025 by ScegliAuto


Related tutorials

How to Replace the Gear Oil in the Piaggio Vespa 50 Special
How to Replace the Gear Oil in the Piaggio Vespa 50 Special
Vespa 50 Special Today, discover the procedure to replace the gear oil in the Piaggio Vespa 50 Special, as well as in the Vespa 125 Primavera. First, place the centra…
How to Change the Engine Oil on the Piaggio Vespa 50 Special?
How to Change the Engine Oil on the Piaggio Vespa 50 Special?
Vespa 50 Special You can change the engine oil on the Piaggio Vespa 50 Special by loosening the drain plug located at the central bottom of the vehicle: once the plug…
How to remove the wheel and tyre from the Piaggio Vespa 50 Special
How to remove the wheel and tyre from the Piaggio Vespa 50 Special
Vespa 50 Special Today's video will show you how to remove and replace the wheel or tyre of the Piaggio Vespa 50 Special, as well as the Vespa PK 50 and PX 125. First…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos