Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, discover the procedure to replace the gear oil in the Piaggio Vespa 50 Special, as well as in the Vespa 125 Primavera. First, place the central stand and begin to unscrew the oil drain screw located under the engine; allow the oil to drain into a container for about ten minutes. At this point, unscrew the filler cap found on the upper part of the engine, and top up accordingly; pour in the suitable oil and fill until the oil flows out of the hole, following the video tutorial to the end!

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gearbox oil of the Piaggio Vespa 50 Special?
How do you replace the gearbox oil of the Piaggio Vespa 50 Special?
Vespa 50 Special It will be possible to replace the gearbox oil of the Piaggio Vespa 50 Special by loosening the drain plug located in the central lower part of the t…
How to remove the wheel and tyre from the Piaggio Vespa 50 Special
How to remove the wheel and tyre from the Piaggio Vespa 50 Special
Vespa 50 Special Today's video will show you how to remove and replace the wheel or tyre of the Piaggio Vespa 50 Special, as well as the Vespa PK 50 and PX 125. First…
How to replace the front shock absorber of the Piaggio Vespa 50 Special
How to replace the front shock absorber of the Piaggio Vespa 50 Special
Vespa 50 Special Today we will see the instructions that will allow us to disassemble and replace the front shock absorber of the Piaggio Vespa 50 Special. First of a…

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos