Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will explain how to check the level of engine oil in the oil tank of the Piaggio Liberty 125. This operation is not only required when the oil light comes on, but it is also very useful before a new journey. To check the oil level, we need to unscrew the black dipstick cap, located between the exhaust cover and the oil cap. Remove the dipstick, clean it with a cloth, and reinsert it into the tank. Pull out the dipstick to check that the oil level is between the minimum and maximum marks. If the oil level is towards the minimum mark, it is necessary to top it up.

Posted on 31 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the ignition switch of the Piaggio Liberty 125?
How do you replace the ignition switch of the Piaggio Liberty 125?
Liberty 125 To replace the ignition switch of the Piaggio Liberty 125, you need to loosen the screws that secure the front fairing of the motorcycle to its housi…
How do you replace the transmission of the Piaggio Liberty 125?
How do you replace the transmission of the Piaggio Liberty 125?
Liberty 125 In order to replace the transmission of the Piaggio Liberty 125, you need to loosen the screws that fix the cover located near the rear wheel, on the…
How do you bleed the brakes on the Piaggio Liberty 125?
How do you bleed the brakes on the Piaggio Liberty 125?
Liberty 125 In order to bleed the brakes on the Piaggio Liberty 125, you will need to loosen the small drain plug located near the front and rear brake calipers.…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos