Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to change the engine oil on a Piaggio Liberty 125 scooter, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the scooter, locate the drain hole bolt, and unscrew it using a 24mm spanner. Allow all the oil in the system to drain out, then extract the secondary filter and clean it of any dirt residue. At this point, simply unscrew the main filter, tighten the replacement, reassemble everything, and add the necessary amount of oil to reach the maximum level.

Posted on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Piaggio Liberty 125
How to Change the Engine Oil of the Piaggio Liberty 125
Liberty 125 Today, in this short guide, learn how to change the engine oil of the Piaggio Liberty 125 scooter. First, place the scooter on its centre stand and s…
How to replace the air filter of the Piaggio Liberty 125 - 50
How to replace the air filter of the Piaggio Liberty 125 - 50
Liberty 125 Follow these steps to remove and replace the air filter cartridge of the Piaggio Liberty 125 scooter, as well as the 50. First, place your scooter on…
How to Change the Engine Oil of the Piaggio Liberty 125?
How to Change the Engine Oil of the Piaggio Liberty 125?
Liberty 125 To change the engine oil of the Piaggio Liberty 125, loosen the oil drain plug located at the central lower area of the bike, near the exhaust. By un…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos