Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Beverly 350
Part: Wheel

In order to remove the front wheel of the Piaggio Beverly 350, you need to loosen the nuts that secure the central axle of the wheel, which locks it to the base of the fork: once these have been loosened and removed, it will be possible to remove the axle as well. Afterwards, you will need to unscrew the screws that secure the brake caliper to its seat, so that it can be detached from the disc: this way you can completely remove the front wheel and insert the new one. The new wheel must be properly installed by reconnecting the caliper as well.

Posted on 15 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
Beverly 350 The main instructions in this guide will show you how to disassemble and replace the dipped beam bulb of the front headlight on the Piaggio Beverly 3…
How to Replace the Belt on the Piaggio Beverly 350?
How to Replace the Belt on the Piaggio Beverly 350?
Beverly 350 To replace the transmission belt on the Piaggio Beverly 350, loosen the screws securing the cover over the rear wheel, located under the one containi…
How to Replace the Belt on the Piaggio Beverly 350?
How to Replace the Belt on the Piaggio Beverly 350?
Beverly 350 To replace the belt on the Piaggio Beverly 350, first loosen the bolts securing the protective cover of the casing located near the rear wheel. Once …

How to Access the Battery in the Benelli 180S?

In this tutorial, you will see how to access the battery in the Benelli 180S, a very simple operation useful if you need to recharge or replace it. First, ensure that the key is not inserted, then remove the passenger seat and, using the provided keys, unscrew the two bolts securing the rider's seat. Once removed, unscrew the screws of the upper plastic bracket, disconnect both terminals starting with the negative, and extract the battery from its housing. To install a replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos