Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Piaggio Beverly 350

Model: Piaggio Beverly 350
Part: Headlight bulb

Video tutorial

The main instructions in this guide will show you how to disassemble and replace the dipped beam bulb of the front headlight on the Piaggio Beverly 350 scooter. First, place the scooter on its stand and begin unscrewing the fixing screws of the headlight unit to remove it; disconnect the electrical connectors of the bulbs found at the back, as illustrated in the video.

At this point, install the new bulbs (dipped and main beam), which have an H7 fitting; finally, reassemble the front headlight, adjusting the beam height if necessary.


Posted on 11 April 2026 by ScegliAuto


Related tutorials

How do you replace the front headlight bulb of the Piaggio Beverly 350?
How do you replace the front headlight bulb of the Piaggio Beverly 350?
Beverly 350 It will be possible to replace the headlight bulb of the Piaggio Beverly 350 by loosening the screws that secure the headlight to its housing: the fi…
How to Change the Front Bulb on a Piaggio Beverly 350
How to Change the Front Bulb on a Piaggio Beverly 350
Beverly 350 How to replace the bulbs on the Piaggio Beverly 350. This model was fitted with standard H7 bulbs, which can be replaced with X3 bulbs. You need to u…
How to Replace the Exhaust on a Piaggio Beverly 350?
How to Replace the Exhaust on a Piaggio Beverly 350?
Beverly 350 To replace the exhaust on a Piaggio Beverly 350, loosen the screws located at the top and bottom to detach the protective plastic cover. Once the pan…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos