Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Bulb on a Piaggio Beverly 350

Model: Piaggio Beverly 350
Part: Light bulb

Video tutorial

How to replace the bulbs on the Piaggio Beverly 350. This model was fitted with standard H7 bulbs, which can be replaced with X3 bulbs. You need to unscrew the two screws that hold the front panel in place.

There are two more underneath. This way, the headlight assembly comes off easily, allowing you to replace the original bulb, which had quite poor illumination.

Remember that new bulbs, especially LED ones, should never be touched with bare hands; always wear disposable gloves. Once the bulb is replaced, you can refit the headlight assembly by screwing the four screws back in place.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
Beverly 350 The main instructions in this guide will show you how to disassemble and replace the dipped beam bulb of the front headlight on the Piaggio Beverly 3…
How do you replace the front headlight bulb of the Piaggio Beverly 350?
How do you replace the front headlight bulb of the Piaggio Beverly 350?
Beverly 350 It will be possible to replace the headlight bulb of the Piaggio Beverly 350 by loosening the screws that secure the headlight to its housing: the fi…
How to Replace the Exhaust on a Piaggio Beverly 350
How to Replace the Exhaust on a Piaggio Beverly 350
Beverly 350 This video provides instructions for removing and replacing the original exhaust with an Akrapovic on a Piaggio Beverly 350 scooter. First, place the…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos