Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb of the Piaggio Beverly 350?

Model: Piaggio Beverly 350
Part: Headlight bulb

Video tutorial

It will be possible to replace the headlight bulb of the Piaggio Beverly 350 by loosening the screws that secure the headlight to its housing: the fixing screws will be located at the top of the instrument panel and at the bottom of the headlight itself.

Once they have been loosened, the headlight unit can be removed from its seat by disconnecting the internal connectors; in this way it will be possible to remove the bulb from the back of the headlight unit in order to insert the new one. Now it will be possible to reposition the headlight and check that everything is working.


Posted on 7 June 2025 by ScegliAuto


Related tutorials

How to Change the Front Bulb on a Piaggio Beverly 350
How to Change the Front Bulb on a Piaggio Beverly 350
Beverly 350 How to replace the bulbs on the Piaggio Beverly 350. This model was fitted with standard H7 bulbs, which can be replaced with X3 bulbs. You need to u…
How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
Beverly 350 The main instructions in this guide will show you how to disassemble and replace the dipped beam bulb of the front headlight on the Piaggio Beverly 3…
How do you remove the front wheel of the Piaggio Beverly 350?
How do you remove the front wheel of the Piaggio Beverly 350?
Beverly 350 In order to remove the front wheel of the Piaggio Beverly 350, you need to loosen the nuts that secure the central axle of the wheel, which locks it …

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos