Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to turn on the high beams of the Piaggio Medley S

Model: Piaggio Medley S
Part: Headlight

Video tutorial

Today we will explain how to turn on and off the high beams of the Piaggio Medley S. Start the scooter and press the button with the high beam symbol located on the left side of the handlebar. To flash other vehicles in case of danger using the high beams, we must move the button to the bottom, while to keep the high beams fixed, move it to the top. If the high beams do not work, it is necessary to check the bulbs, the internal connector, and the fuse related to their operation.

The ignition procedure explained in the following video is valid for all vehicles produced from 2017 onwards.


Posted on 30 July 2025 by ScegliAuto


Related tutorials

How to enable the turn signals on the Piaggio Medley S
How to enable the turn signals on the Piaggio Medley S
Medley S Today we will explain how to enable and disable the turn signals of the Piaggio Medley S. To activate the turn signals when we need to make a turn on…
How to check the travel information of the Piaggio Medley S
How to check the travel information of the Piaggio Medley S
Medley S Today we will explain how to check the travel information and total kilometers of the Piaggio Medley S by accessing the menu independently and withou…
How to Disable the Start&Stop on the Piaggio Medley S?
How to Disable the Start&Stop on the Piaggio Medley S?
Medley S To disable the Start&Stop on the Piaggio Medley S, insert the ignition key into the corresponding ignition switch. Once it is turned on, use the dedi…

How to Adjust the Time on a Triumph Street Triple 1200 RS?

In this tutorial, you will see how to adjust the time on a Triumph Street Triple 1200 RS, a very simple and quick operation to perform, for example, after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the dashboard and navigate to the general menu on the display using the directional buttons on the left-hand dial. Next, enter "Date & Time", adjust both the clock and the date as needed, and save the setting by returning to the main screen.

Watch the video!


by ScegliAuto

More videos