Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Beverly 300
Part:

Today we will explain how to assemble the stand of the Piaggio Beverly 300 independently. To assemble the stand, we must first remove the lower fairing of our scooter. Then we lubricate the sliding surfaces of the stand and bracket with specific grease. We place the stand on the support bracket, insert the two screws, and secure the stand with the locking nut. Immediately after, we fix the spring using a spring tensioner that will help us to tension it and position it correctly. We fix the internal support of the bracket using the two elastic washers and make sure to tighten the screws well with the tightening torque of the stand between 12 and 16 Nm.

Posted on 28 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to open the seat of the Piaggio Beverly 300
How to open the seat of the Piaggio Beverly 300
Beverly 300 The information provided in this guide will show us how to open and close the seat of the Piaggio Beverly 300 scooter, in simple and quick steps. Fir…
How to replace the battery of the Piaggio Beverly 300
How to replace the battery of the Piaggio Beverly 300
Beverly 300 Today, in this guide, we will see the instructions that will allow us to disassemble and replace the battery of the Piaggio Beverly 300 scooter. Firs…
How to Remove the Fan and Variator on a Piaggio Beverly 300
How to Remove the Fan and Variator on a Piaggio Beverly 300
Beverly 300 In this guide, you will see the main instructions on how to remove and replace the fan, drive belt, and variator on the Piaggio Beverly 300 scooter. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos