Do it yourself
Frequently asked questions about cars and motorcycles
If you want to manually reset the service light on the central display of your Vespa GTS 300, all you have to do is read the following guide and follow the described procedure. First, insert the key and turn on the ignition of your Vespa GTS 300, then use the navigation button located below the left handlebar (central button) and find the menu item related to the scooter service. At this point, you must hold down the same button until you are notified of the completion of the reset of the light. Finally, turn off the ignition.

Posted on 5 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Vespa Gts 300 To manually reset the service light that appears on the central display of your Vespa GTS 300, follow these steps. First, ensure that your Vespa GTS …
Vespa Gts 300 In this new guide dedicated to the Vespa GTS 300, discover how to manually reset the service light without the need for a professional. First, comple…
Vespa Gts 300 To reset the Service light on a Piaggio Vespa GTS 300, start by turning on the ignition by turning the key in the ignition switch; at this point, pre…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos