Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the handlebar of the Piaggio Vespa 50 Special?

Model: Piaggio Vespa 50 Special
Part:

Video tutorial

In order to replace the handlebar of the Piaggio Vespa 50 Special, you first need to pry with an object and loosen the screws to remove the instrument panel from its housing: you will then need to proceed by disconnecting the connectors at the back.

At this point, it will be possible to loosen the screws that secure the brake calipers and proceed by unscrewing the one that secures the fairing of the handlebar from the bottom.

Then, you will need to unscrew the screws at the bottom of the instrument panel housing: this way, it will be possible to loosen the central nut that secures the handlebar in order to remove it.


Posted on 8 October 2025 by ScegliAuto


Related tutorials

How do you replace the gearbox oil of the Piaggio Vespa 50 Special?
How do you replace the gearbox oil of the Piaggio Vespa 50 Special?
Vespa 50 Special It will be possible to replace the gearbox oil of the Piaggio Vespa 50 Special by loosening the drain plug located in the central lower part of the t…
How to Replace the Gear Oil in the Piaggio Vespa 50 Special
How to Replace the Gear Oil in the Piaggio Vespa 50 Special
Vespa 50 Special Today, discover the procedure to replace the gear oil in the Piaggio Vespa 50 Special, as well as in the Vespa 125 Primavera. First, place the centra…
How to Adjust the Carburetion on a Piaggio Vespa 50 Special
How to Adjust the Carburetion on a Piaggio Vespa 50 Special
Vespa 50 Special This guide shows how to perform the maximum carburetion adjustment on the engine of the Piaggio Vespa 50 Special, as well as the Vespa 125 Primavera.…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos