Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Piaggio Xevo.

Model: Piaggio Xevo 250
Part: Headlight bulb

Video tutorial

If you own a Piaggio Xevo and want to find out what steps you need to take to replace the front headlight bulb, then all you have to do is follow the instructions in the following guide. First of all, remove the front plastic and use a battery-powered screwdriver (or a Phillips screwdriver) to unscrew the screws present.

Once you have done this, also unscrew the screw located at the bottom and pull the entire headlight towards you. Finally, remove the bulb holder and replace the faulty bulb with a new one of the same type.


Posted on 28 January 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter of the Piaggio Xevo 250
How to Replace the Engine Oil and Oil Filter of the Piaggio Xevo 250
Xevo 250 This guide explains how to perform the routine maintenance service for changing the oil and oil filter on the Piaggio Xevo 250 scooter. First, place …
How to Replace the Front Bulb on a Piaggio Xevo 250
How to Replace the Front Bulb on a Piaggio Xevo 250
Xevo 250 Want to replace the bulb on your scooter? You're in the right place. Unscrew the two screws in the air intake, under the windscreen. Now you need to …
How to Replace the Belt on the Piaggio X-Evo 250?
How to Replace the Belt on the Piaggio X-Evo 250?
Xevo 250 To replace the belt on the Piaggio X-Evo 250, you need to loosen the screws that secure the transmission cover, located on the left side of the scoot…

How to Replace the Headlight Bulbs on the Triumph Speed Triple 765 R?

In this tutorial, you will see how to replace the headlight bulbs on the Triumph Speed Triple 765 R, a very simple and quick operation. First, ensure that the key is not inserted, then locate the large cap at the back of the headlight and remove it by turning it counterclockwise. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos