Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Belt on the Piaggio X-Evo 250?

Model: Piaggio Xevo 250
Part: Checks and maintenance

Video tutorial

To replace the belt on the Piaggio X-Evo 250, you need to loosen the screws that secure the transmission cover, located on the left side of the scooter near the rear wheel. Once the cover is removed, you will have access to the underlying components: the central nut securing the clutch bell and the variator can be unscrewed, allowing both components to be removed.

This way, you can slide out the old belt and insert the new one, reassembling all previously removed components.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter of the Piaggio Xevo 250
How to Replace the Engine Oil and Oil Filter of the Piaggio Xevo 250
Xevo 250 .. changing the oil and oil filter on the Piaggio Xevo 250 scooter. First, place the scooter on its stand and start by unscrewing the oil drain bolt located.. …
How to Replace the Front Bulb on a Piaggio Xevo 250
How to Replace the Front Bulb on a Piaggio Xevo 250
Xevo 250 Want to replace the bulb on your scooter? You're in the right place. Unscrew the two screws in the air intake, under the windscreen. Now you need to …
How to replace the headlight bulb of the Piaggio Xevo.
How to replace the headlight bulb of the Piaggio Xevo.
Xevo 250 If you own a Piaggio Xevo and want to find out what steps you need to take to replace the front headlight bulb, then all you have to do is follow the…

How to Replace the Headlight Bulbs on the Triumph Speed Triple 765 R?

In this tutorial, you will see how to replace the headlight bulbs on the Triumph Speed Triple 765 R, a very simple and quick operation. First, ensure that the key is not inserted, then locate the large cap at the back of the headlight and remove it by turning it counterclockwise. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos