Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulb on a Piaggio Xevo 250

Model: Piaggio Xevo 250
Part: Headlight

Video tutorial

Want to replace the bulb on your scooter? You're in the right place. Unscrew the two screws in the air intake, under the windscreen.

Now you need to remove the two mirrors. Lift the cover at the base and unscrew the two bolts with a small spanner, repeat on the other side.

Remove the remaining screws to take off the front fairing. Only two pins hold the headlamp in place; after removing them, disconnect the electrical connector.

Once the sealed cover is lifted, you can proceed to replace the bulb, insert the new part, and position it in its seat. Refit the cover and remount the headlamp, first reconnecting its connector.

Continue to reassemble in reverse order.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Piaggio Xevo.
How to replace the headlight bulb of the Piaggio Xevo.
Xevo 250 If you own a Piaggio Xevo and want to find out what steps you need to take to replace the front headlight bulb, then all you have to do is follow the…
How to Replace the Engine Oil and Oil Filter of the Piaggio Xevo 250
How to Replace the Engine Oil and Oil Filter of the Piaggio Xevo 250
Xevo 250 This guide explains how to perform the routine maintenance service for changing the oil and oil filter on the Piaggio Xevo 250 scooter. First, place …
How to Replace the Belt on the Piaggio X-Evo 250?
How to Replace the Belt on the Piaggio X-Evo 250?
Xevo 250 To replace the belt on the Piaggio X-Evo 250, you need to loosen the screws that secure the transmission cover, located on the left side of the scoot…

How to Replace the Headlight Bulbs on the Triumph Speed Triple 765 R?

In this tutorial, you will see how to replace the headlight bulbs on the Triumph Speed Triple 765 R, a very simple and quick operation. First, ensure that the key is not inserted, then locate the large cap at the back of the headlight and remove it by turning it counterclockwise. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos