Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Piaggio Xevo 250

Model: Piaggio Xevo 250
Part: Engine oil

Video tutorial

This guide explains how to perform the routine maintenance service for changing the oil and oil filter on the Piaggio Xevo 250 scooter. First, place the scooter on its stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then remove the small filter inside.

Now unscrew the oil filter cartridge and replace it with the new one, tightening it by hand gently; then unscrew the filler cap and pour in the new oil!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Piaggio Xevo.
How to replace the headlight bulb of the Piaggio Xevo.
Xevo 250 If you own a Piaggio Xevo and want to find out what steps you need to take to replace the front headlight bulb, then all you have to do is follow the…
How to Replace the Front Bulb on a Piaggio Xevo 250
How to Replace the Front Bulb on a Piaggio Xevo 250
Xevo 250 Want to replace the bulb on your scooter? You're in the right place. Unscrew the two screws in the air intake, under the windscreen. Now you need to …
How to Replace the Belt on the Piaggio X-Evo 250?
How to Replace the Belt on the Piaggio X-Evo 250?
Xevo 250 To replace the belt on the Piaggio X-Evo 250, you need to loosen the screws that secure the transmission cover, located on the left side of the scoot…

How to Replace the Headlight Bulbs on the Triumph Speed Triple 765 R?

In this tutorial, you will see how to replace the headlight bulbs on the Triumph Speed Triple 765 R, a very simple and quick operation. First, ensure that the key is not inserted, then locate the large cap at the back of the headlight and remove it by turning it counterclockwise. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos